Who hates the way their Falcon/Comet steer? Everybody! You can fix that with one of our bolt on complete rack & pinion kits.
One of UniSteer's own builds, we used a center take off style rack mounted to a one piece U-shapped bracket that bolts up to the back side of your stock motor / frame mounts. Slide the bracket up into place and install with our longer bolts.
Installs on these cars have been done with stock manifolds or Hooker Super Comp Headers. Other headers may work with modification. Tri-Y style headers do NOT work. This kit works with V8 motors and floor shifters. This kit will not work with the factory column shifter, but it will work with an aftermarket column shifter.
If your Falcon or Comet had inline 6, the spindles have a different taper, just let us know and we can get you a different set of outers.
Note: We have run into cars with Granada spindles, and this kit will NOT work with those spindles.
Click to view instruction sheet
Tech Info:
Pinion Type/Size: 9/16" - 26 spline
Amount of Travel: 6"
Turns Lock to Lock: 3.75 Turns
Inner End Threads: 9/16" - 18
Outer Ends: Included
Kit Includes:
Rack and Pinion
Outer Tie Rod Ends
Mounting Bracket
Mounting Hardware
Steering Shaft Kit