Change it up on your Torino with our Bolt- Power Rack & Pinion Kit that will make your Torino the envy of your buds. Make it steer and handle like your daily driver. Unisteer’s system is complete – everything you need to make the switch over as painless
as possible.
This is a center take off rear steer rack and pinion with a ball center bar that is the exact same size as the original center link. The one piece mounting bracket bolts to the same factory holes that help the steering box and idler arm, and orients the rack, placing the ball center bat in the same plane as the original center link.
On small block cars we have used and recommend Hooker Comp Headers. Other headers may work, but might require modifications, or a three u-joint setup.
Click to view instruction sheet
Tech Info:
Pinion Type/Size: 17mm DD
Amount of Travel: 6"
Turns Lock to Lock: 2.5 - 2.75 Turns
Pressure Port Size: 18mm - 6AN Banjo (Lower)
Return Port Size: 16mm - 6AN Banjo (Upper)
Pump Required: Low Flow / Pressure
Inner End Threads: 9/16" - 18
Outer ends: 8021320
Kit Includes:
Rack and Pinion
Mounting Bracket
Mounting Hardware
Outer Tie Rod Ends
Pump and Line Kit
Steering Shaft Kit